I wouldnt evva do that 3 i just gotta greenslip 4 this tweet hahaha 58

You can keep your netbook harmless on your travels along with some homemade netbook sleeve made from a bit of Tyvek weather wrap and a layer regarding foam padding. The Tyvek assists keep moisture aside from the equipment and the foam padding helps protect the netbook from surprising bangs and bumps. If you would like to make the sleeve a little bit more elegant, add a material cover over top of the Tyvek.

Difficulty: Easy

Directions

Things You'll Require

Tyvek weather wrap ¼-inch thick froth padding Craft glue Sewing pins Sewing needle Thread Velcro

1 Method the period and width of the netbook. Multiple the length by 2 also add 4 inches for a last length. Add 2 inches to the width to a last length. For example, a netbook for a length of 12 inches and a width of 8 inches will maintain any final sleeve period regarding 28 inches by a final sleeve width of 10 inches.

2 Lay down a piece of Tyvek weather wrap on a clean up working surface plus draw a rectangle that is measures the final length of the netbook by way of the last width. Greenslip.

3 Cut a rectangular piece of ¼-inch foam padding with some width of 1 inch reduced than the final width from action 1 and some length regarding 3 inches less besides the final length. Using the instance above, the foam padding rectangle will equal 9 inches wide by means of 23 inches long.

4 Place the Tyvek rectangle on your working area. Insure one particular side of the foam padding with a layer regarding glue and align the padding over top of the Tyvek. Prepare the padding ½-inch away out of every long edge and 1 ½ inches away from each short edge.

5 Place the foam padding on your operating surface and cover it in any layer regarding glue. Center the Tyvek rectangle on the froth padding with ½-inch about the Tyvek overhanging every part of the padding. Sleek the pieces together.

6 Flip above the rectangles so the Tyvek is on the bottom. Fold the 1 ½ inches about extra Tyvek in the short ends around best of the froth padding plus sew it in location.

7 Turn the bits back over so the Tyvek is on the bottom and fold the pieces in half lengthwise to decrease the length in half. Pin the ½-inch of Tyvek along the parts and sew the pieces together.

8 Turn the sleeve suitable side out.

9 Reduce any long ½-inch-broad bit of Velcro and apply some line of glue to the back of the Velcro. Press it against the top center of the inside regarding the sleeve. Glue the complementary bit of Velcro to the opposite interior side regarding the sleeve.

References

Picture Credit Ethan Miller/Getty Images News/Getty Pictures ;

Comments